1

The faults that are prone to occur in the filling machine

release date:

2022-09-17 10:28

1. The safety box of the trapping machine is broken. It is to check whether the filling is too hard or the machine is not installed properly.

2. The conveyor belt of the wrapping machine is slipping. Is it because there is too much flour sprinkled or the belt is too loose or there is too much garbage inside.

3. The motor mechanism of the trapping machine is loose, whether the screws are lost or the accessories are worn or the bearings are loose.

4. The cutter of the trapping machine has a tail. Is it because the cutter is worn or the bearing of the cutter is broken or the machine is not adjusted properly.

5. The output of the die head is biased, check whether the filling is too hard or too soft or the inner tube is not installed properly.